TOPTEMPO INDUSTRIAL CO.,LTD
Professionally experienced in customer resourcing and developing, strong faith in project quality management and high sense of risk management. Strict quality assurance system, and improve after-sales
Add to Cart
A bucket elevator belt is a combination of high strength belting with metal or plastic buckets attached to it. It is commonly used for elevating bulk products in granular form in an enclosed structure to a higher point for unloading into a silo.
Our belts with steel cord construction distributes load evenly reducing elongation. Less time is needed to re-tension the belts, saving maintenance costs. Lighter compared to rubber belts, energy consumption is reduced by using our bucket elevator belts, lowering production costs.
We have a wide range of belt types for different products. Food grade, abrasion resistant, vegetable oil and animal fat resistant belts are available for food applications. Abrasion, cut and mineral oil resistant belts are also available for industrial applications.
Carcass: Steel cord
Max. Belt Width: 400~1200 mm
Cover Rubber: Resistant to wear, oil, heat and anti-static.
120 ℃ HEAT RESISTANCE 2 PLIES ANTI-TEAR STEEL CORD BUCKET ELEVATOR CONVEYOR BELT 850 ST2000 6/6 W
| |||
| 1. | Nominal breaking strength | DIN22131 | 2000N/mm |
| 2. | Belt size | Standard | |
| 2.1 | width | DIN22131 | 850±8 mm |
| 2.2 | Thickness | 25.0±1 mm | |
| 2.3 | Belt weight | Appr. | 24.3 kg/m |
| 3. | Steel cord | ||
| 3.1 | Number of cord | 82 number | |
| 3.2 | Diameter of cord | 6± 0.2 mm | |
| 3.4 | Breaking strength | ≥26.4 KN | |
| 3.5 | Cord pitch | 10±1.5mm | |
| 4. | Cover Rubber | ||
| 4.1 | Thickness of top cover | DIN22131 | 6 -0.9+0.8 mm |
| 4.2 | Thickness of bottom cover | DIN22131 | 6-0.6+0.6 mm |
| 4.3 | Tensile strength | DIN53504 | ≥20 N/mm3 |
| 4.4 | Elongation at break | DIN53504 | ≥400 % |
| Tensile strength after 7 d/ 70 ℃ | DIN53508 | ≥18 N/mm3 | |
| Elongation at break after 7 d/70 ℃ | DIN53508 | ≥400 % | |
| 4.5 | Tear resistance | DIN53507 | ≥12 N/mm |
| 4.6 | Hardness | DIN53505 | 65± 5 SHORE A |
| 4.7 | Max Abrasion | IDIN53516 | ≤120 mm3 |
| 4.8 | Rubber Grade resistance | Y | |
| 4.9 | Density | DIN53479 | 1.2±0.02 g/cm3 |
| 5 | Pull-out strength of cord | DIN22131 | |
| 5.1 | As received | ≥ 105 N/mm | |
| 5.2 | After thermal treatment | 145℃/150 min | ≥95 N/mm |
| 6. | Adhesion | ||
| 6.1 | Top cover/bonding rubber | DIN22131 | ≥ 12.0 N/mm |
| 6.2 | Bottom cover/bonding rubber | DIN22131 | ≥ 12.0 N/mm |